AquaPod
A Cylinder Built For Efficiency
The AquaPod is our heat pump cylinder and the latest recruit to our product line-up. This very clever cylinder is used in conjunction with your air source heat pump.
How Does The AquaPod Work?
The AquaPod Heat pump cylinder is designed with a min of 3m2 high efficiency copper finned tube heat exchanger to enable high rates of thermal transfer from the primary heat pump circuit.
A large selection of heights and diameters are also available in our range of Heat Pump cylinders where space and water volumes are at a premium.
Utilize Renewable Energy
In general, our Heat Pump cylinders are sized to work in tandem with and increase the efficiency of the renewable heat source, be it air to water or ground source.
Direct, Indirect and Twin Coil Cylinders can all be selected from the range as well as being built to our customer’s specification.
Why Choose the Aquapod?
10-year cylinder warranty
Sizes from 120 Litres
Insulated with 50mm PU Foam
Manufactured out of Grade 2 Copper
Supplied vented or unvented
Air to Water or Ground Source HP
Well Water Compatible
Why Choose Copper?
Recycled copper meets 42% of the European copper demand, using only 15% of the energy required in extracting new raw materials, making it sustainable, environmentally friendly and the most recycled plumbing material available today.
Copper also has a long and established history of being used in conveying clean, safe drinking water because of its natural antibacterial properties and inherent health benefits making it a well trusted, tried and tested material for water supply and storage. The presence of copper ions destroy potential Legionella harbouring bacteria responsible for Legionnaires’ disease, making your water clean and safe to drink.
(Adapted from: UK Copper Board)
Copper is a well-known, trusted, corrosion resistant. With great benefits.
100%
Recyclable material
Health benefits
Legionella Protection
Copper Industries Hot Water Cylinders ensure water moves in greater frequency than in traditional hot water storage cylinders, ensuring the hygiene of the water is good as it never stagnates for long periods of time. This constantly moving water does not allow legionella harbouring bacteria to grow and means your water is always safe!
AquaPod Specification
AquaPod Cylinder
AquaPod Cylinder
- A - Buffer vent connection
- B - Flow connection from heat pump
- C - Return to heat pump
- D - Flow out from buffer
- E - Return back to buffer
- F - Drain connection
- G - 22mm Coil 1 return in
- H - 22mm Coil 2 return out
- I - Direct buffer tank
- J - Immersion heater
- K - Stat connection
AquaPod Thermal Store
AquaPod Thermal Store
- A - 50mm Insulation lagging
- B - 1/2" Pressure relief (2 Bar)
- C - 1" Oil boiler flow
- D - 1/2" Sensor pocket
- E - 1" Heating flow
- F - 1/2" Sensor pocket
- G - 1" Oil boiler return
- H - 1" Heat pump flow
- I - 1" Heat pump return
- J - 1/2" Drain
- K - 1/2" AAV
- L - Hot Water out
- M - 22mm Mixing valve
- N - 0.16l Expansion vessel
- O - 22mm Non return valve
- P - 22mm Intaball combi ball valve/ cold in
- Q - 1/2" Sensor pocket
- R - 1" Heating return
Aquapod Cylinder
Aquapod Thermal Store
All of our cylinders can be customized to suit your needs. As well as our award-winning range of products, we also offer a custom 3D CAD design service allowing your exact specifications to be met.